|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Power SIP Relay CPC1926Y Blocking Voltage Load Current On-Resistance CPC1926Y 250 0.7 1.4 Units VP Arms Description Clare and IXYS have combined to bring OptoMOS(R) technology, reliability and compact size to a new family of high power solid state relays. As part of that family, the CPC1926Y is a 1-Form-A solid state relay. The CPC1926Y employs optically coupled MOSFET technology to provide 2500Vrms of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS architecture while the input is controlled by a highly efficient GaAlAs infrared LED. The combination of low on resistance and high load current handling capabilities makes the relay suitable for a variety of high performance switching applications. Features * * * * * * * * * Power SIP Package Handle Load Currents Up to 0.7 Arms High Reliability No Moving Parts Low Drive Power Requirements (TTL/CMOS Compatible) Arc-Free With No Snubbing Circuits 2500Vrms Input/Output Isolation No EMI/RFI Generation Machine Insertable, Wave Solderable Approvals * UL recognized component: File # E69938 * Certified to: UL 508 Applications Industrial Controls Motor Control Robotics Medical Equipment--Patient/Equipment Isolation Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * IC Equipment * Home Appliances * * * * * Ordering Information Part # CPC1926Y Description Power SIP Package (25 per tube) Pin Configuration CPC1926Y Pinout Switching Characteristics of Normally Open (Form A) Devices DS-CPC1926Y-R02 www.clare.com 1 CPC1926Y Absolute Maximum Ratings (@ 25 C) Parameter Blocking Voltage Reverse Input Voltage Input control Current Peak (10ms) Input Power Dissipation 1 Isolation voltage Input to Output Operational Temperature Storage Temperature 1 Ratings 250 5 50 1 150 2500 -40 to +85 -40 to +125 Units VP V mA A mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 3.33 mw / C Electrical Characteristics Parameter Output Characteristics @ 25C Load Current, Continuous Peak Load Current On-Resistance1 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Input/Output Characteristics @ 25C Capacitance Input/Output 1 Conditions Free air 10ms IL=100mA VL=250V IF=5mA, VL=10V IF=5mA, VL=10V 50V, f=1MHz IL=120mA IF=5mA VR=5V f=1MHz Symbol IL Min 10 0.6 0.9 - Typ 1.2 5 3 60 1.2 2 Max 0.7 3 1.4 1 10 10 1.4 10 - Units Arms Arms A ms ms pF mA mA V A pF ILPK RON ILEAK TON TOFF COUT IF IF VF IR CI/O Measurement taken within 1 second of on time. Thermal Characteristics Parameter Thermal Resistance (junction to case) Conditions Symbol RJC Min Typ 1.5 Max Units C/W 2 www.clare.com R02 CPC1926Y PERFORMANCE DATA* 35 30 Device Count (N) 25 20 15 10 5 0 1.260 1.265 1.270 1.275 1.280 Device Count (N) 35 Device Count (N) 30 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 1.27 35 30 25 20 15 10 5 0 265 267 269 271 273 275 277 LED Forward Voltage (V) Blocking Voltage (V) CPC1926Y Typical Load Current vs. Temperature 25 20 15 10 5 0 25 20 15 10 5 0 Load Current (Arms) 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.015 0.017 0.019 0.021 0.023 0.025 Turn-Off (ms) -40 -20 0 20 40 60 Device Count (N) Device Count (N) IF = 20mA IF = 10mA 80 100 120 1.8 2.0 2.2 2.4 2.6 2.8 Turn-On (ms) 0.035 0.030 0.025 0.020 0.015 0.010 0.005 0 CPC1926Y Typical Leakage vs. Temperature at Maximum Rated Voltage (Measured across Pins 3 & 4) Blocking Voltage (V) CPC1926Y Blocking Voltage vs. Temperature 300 295 285 280 275 270 265 260 -40 -20 0 20 40 60 80 100 Turn-On (ms) 290 1.400 1.200 1.000 0.800 0.600 0.400 0.200 0 -40 CPC1926Y Typical Turn-On vs. Temperature (Load Current = 100 mADC) IF = 10mA IF = 20mA -40 -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 0.06 Turn-Off (ms) 0.05 0.04 0.03 0.02 0.01 0 -40 -20 0 20 40 60 80 100 IF = 10mA IF = 20mA LED Forward Voltage Drop (V) 0.07 CPC1926Y Typical Turn-Off vs. Temperature (Load Current = 100 mADC) 1.8 1.6 1.4 1.2 1.0 0.8 CPC1926Y Typical LED Forward Voltage Drop vs. Temperature IF = 50mA IF = 20mA IF = 10mA 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 CPC1926Y Typical Turn-On vs.LED Forward Current (Load Current = 100 mADC) Turn-On (ms) -40 -20 0 20 40 60 80 100 120 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R02 www.clare.com 3 CPC1926Y PERFORMANCE DATA* CPC1926Y Typical Turn-Off vs. LED Forward Current (Load Current = 100 mADC) CPC1926Y Typical On-Resistance vs. Temperature (Load Current = 100 mADC) IF = 5mA 5.50 5.25 5.00 4.75 4.50 4.25 4.00 3.75 3.50 3.25 3.00 0.09 0.08 Turn-Off (ms) 0.07 0.06 0.05 0.04 0.03 0.02 0.01 0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 CPC1926Y Typical IF for Switch Operation vs. Temperature (Load Current = 100mA) IF = 10mA 0 5 10 15 20 25 30 35 40 45 50 0 -40 -20 0 20 40 60 80 100 LED Current (mA) -40 -20 0 20 40 60 80 100 LED Forward Current (mA) 8 1.25 1.00 0.75 0.50 0.25 0.00 -0.25 -0.50 -0.75 -1.00 -1.25 -1.5 7 Load Current (Arms) 6 5 4 3 2 1 0 -1.0 -0.5 0 0.5 1.0 1.5 CPC1926Y Energy Rating Curve (Free air, no heat sink) Load Current (A) 1ms 10ms 100ms Time 1s 10s 100s Load Voltage (V) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R02 Manufacturing Information Soldering Recommended soldering processes are limited to 245C component body temperature for 10 seconds. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 7 TYP 4 PLCS PIN 1 0.070 (1.778) PIN 4 Dimensions: inches (mm) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1926Y-R02 (c)Copyright 2005, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 5/26/05 |
Price & Availability of CPC1926Y |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |